|
Manufacturer |
Product |
Features |
| 1. |
Nireco Corporation |
Marking system
- jet markers
- dot markers |
One nozzle type and dot-matrix type spray markers used in production lines in a wide range of industries |
| Level gauges |
Eddy-current type high-efficiency level gauges |
| Near-infrared analyzers |
Able to analyze trace amounts of multiple components in powder, solid, and liquid samples without any prior preparation |
| 2. |
Kintsune Seiki Co., Ltd. |
Marking presses
- embossing presses
- air pen type
- hot-stamp machines |
Capable of marking all types of materials, including iron, aluminum, and resin |
| 3. |
Japan Development Consultants, Inc. |
Non-scratching tension unit
- LATEST:
RB21-WD Type
RB21-SO Type
- BELTBRIDLE
- ROBELTOR
QUOTE(PDF) |
KBK has handled over 600 of these fine products,
renowned for their exceptional quality and reliability. They are installed in
the slitter line and are used to apply tension to and neatly wind up slitting
coils without damaging them. The equipment can be applied to both slitter and
recoiling lines. |
| 4. |
Yonemori Ironworks Co., Ltd. |
Slitter lines |
Slitter lines and leveler shir-lines |
| 5. |
(France) JARRET |
Jarret spring |
Visco-elastic shock absorbers |
| 6. |
(U.S.) Tinius Olsen, Inc. |
Drawability Tester |
Devices for testing the drawability of steel sheets |
| 7. |
(U.K.) BNFL Engineering, Ltd. |
Cranes, manipulators, and other machines as well
as expertise for reprocessing facilities |
Equipment and expertise for nuclear fuel reprocessing
plants |
| 8. |
(U.S.) Van Air Systems, Inc. |
Air/gas dryers
(Deliquescent type, heatless type, heating type, energy-saving type) |
Deliquescent type low-cost, non-electric dryers utilizing a special desiccant
Regenerative-type dryers (heating / heatless) for low dew point |
| automatic drain valves |
Automatic valves for all types of drains |
| filters |
High grade filters to remove oil mist |
| aftercoolers |
Water / air aftercoolers |
| 9. |
Yowa Industries Co., Ltd. |
Pressure containers |
Pressure containers |
| 10. |
(Belgium) Vesvius Systems S.A. |
Automatic replacement systems for SEN nozzles used in continuous casting |
Sale of inline automatic replacement systems for submerged entry nozzles used in continuous casting machines, as well as fire-resistant materials |
| 11. |
(U.S.) ESAB/L-TEC Steel Industry Products |
Steel cut-off/ cutting equipment |
Steel cutting machines using oxy-fuel |
| Mechanical deburring equipment |
The dross blades effectively eliminate the cutting
dross beneath both ends of slabs |
| 12. |
Nippon Sping Co., Ltd. |
Gas-powered deburring equipment |
Deburring equipment that uses an oxidation reaction
involving fuel gas combustion to remove burrs created during slab cutting |
| Check scarfing equipment |
Equipment that uses fuel gas to detect imperfections
below the surface of the slab and determine the quality of the product |
| 13. |
(U.S.) Certified Alloy Products, Inc.
|
Alloys |
Alloy ingots for precision cast parts |
| 14. |
(U.K.) Ross & Catherall, Ltd. |
Superalloys |
Alloy ingots for precision cast parts |
| 15. |
(U.K.) Ross Catherall Ceramics, Ltd. |
Ceramic cores |
Cores for precision cast parts |
| 16. |
Toho Yogyo Co., Ltd. |
Non-tex roll |
Special rolls wound with nonwoven fabric to achieve
a high friction coefficient |
| 17. |
Mitsubishi Nagasaki Machinery Manufacturing Co.,
Ltd. |
Link conveyors |
Energy-saving conveyor systems that use short-link
chains to transport materials within pipes. They take up little space, help keep
the factory beautiful, and reduce the need for manual labor. |
| 18. |
(U.K.) Sheffield Forgemasters Rolls Ltd. |
Rolls for iron/steel manufacturing |
Rolls |
| 19. |
(Germany) UNION Apparatebau GmbH |
Calorimeters |
Instruments that measure the caloric value of
gas |
| 20. |
(Germany) SLE Electronic GmbH |
Crimp monitoring/cross-section analysis equipment |
Equipment that monitors the condition of crimps
in wire / terminal connections by analyzing cross-section photographs of the crimps |
| 21. |
(Germany) SCHUNK Ultrasschalltechnick GmbH |
Ultrasonic metal welding equipment |
Ultrasonic metal welding equipment used to weld
wires together on automobile harnesses |
| 22. |
(U.K.) Forward Industries Ltd. |
Manipulators |
Remote handling equipment used in the nuclear
power industry |
| 23. |
Toshiba Corp. |
Turbines, generators |
Products trusted throughout the electric power
industry and applied to a number of different fields |
| Accelerators, superconductors |
Equipment used in high-energy physics, materials
research, silicon monocrystal lifting, etc. |
| Motors |
High-efficiency motors and other devices for high/low
pressure, pressure-resistant, and anti-explosive uses |
| Inverters |
High / low pressure inverters |
| X-ray thickness meters |
X-ray thickness meters for ferrous / nonferrous
metals |
| PatrolMeister |
PDA-based maintenance management systems |
| CCD cameras, monitors |
CCD cameras, network cameras, digital video servers,
and high-speed revolution equipment |
| 24. |
Ishikawajima-Harima Heavy Industries Co., Ltd. |
Boilers |
Power generating boilers that have been successfully
applied to a variety of fields |
| 25. |
Thermoteknix Systems Ltd. |
IR Reporter |
Thermoviewers equipped with an extensive array
of software functions |
| Centurion |
High-detail radiation thermometers used in cement
kilns and iron / steel production lines |
| Thermascope |
Temperature measurement systems for the insides
of furnaces |
| 26. |
Sumitomo Metal System Solutions Co.,
Ltd. |
Intouch |
Monitoring / control software tools |
| Avantis |
Safety / inventory / purchasing management software
package |
